Cleaning And Maintenance; Filter System - Pkm DW9A++7TI Bedienungsanleitung

How to select the 3in1 programme
1. Press the ON/OFF button and select the 3in1 programme by pressing the
3in1 button until the 3in1 indicator flashes.
2. The 3in1 programme is available after you pressed the 3in1 button and the
3in1 indicator is on.
How to cancel the 3in1 programme
1. Follow the instructions in HOW TO CHANGE A PROGRAMME. If you
want to operate the appliance with a standard detergent system again, then
proceed as follows:
a. Fill the water softener and the rinse aid container.
b. Set the water hardness to the highest possible value and let the appliance
operate for 3 normal wash-cycles without load.
c. Readjust the water hardness setting according to the conditions of your
water supply.

7. Cleaning and maintenance

1. WARNING! Disconnect the appliance from the mains before you
clean or maintain it.
2. Always keep the appliance clean so that unpleasant odours do not occur.
3. Take off all rings and bracelets before cleaning or maintaining the appliance;
otherwise you will damage the surface of the appliance.

7.1 Filter system

The filter system protects the pump against remnants of food and other objects.
These remnants can clog the filters after a while. The filter system comprises a
coarse filter, a flat filter and a micro filter.
 Check the status of the filters after each programme.
 When you remove the coarse filter, you can remove all filters of the system.
Remove any remnants and clean the filters with flowing water.
72