VOLTCRAFT Charge Manager 2016 Bedienungsanleitung Seite 32

Location for Installation
• The product is intended for dry indoor use only. The product must not
become damp or wet. There is danger of a fatal electric shock!
• Choose a solid, flat, clean and sufficiently large surface for the charger.
Never place the charger on a flammable surface (e.g. carpet, tablecloth).
Always use a suitable, non-flammable, heatproof surface. Keep the charger
away from flammable or easily inflammable materials (e.g. curtains).
• Ensure that the cables are not crushed or damaged by sharp edges. Install
the connection cable between the mains adapter and the charger so that no
one can trip over it.
• Do not place any containers filled with liquid, e.g. vases or plants, on or next
to the product.
When these liquids get into the charger, the charger will be destroyed and
there is great danger of fire or explosion.
In this case, immediately disconnect the product from the power supply, then
remove any inserted batteries. Do not use the charger again - bring it to a
specialist workshop.
If any liquids get into the mains adapter, power down the mains socket to
which the mains adapter is connected. For this, turn off the corresponding
circuit breaker or unscrew the fuse. Then unplug the mains adapter from the
mains socket. Do not use the mains adapter anymore and take it to a
specialized workshop or dispose of it according to the legal provisions.
• Do not place the charger on any valuable furniture surfaces without using a
suitable protection.
32