Operation; A) Selection Of Battery Chemistry; B) Start Of Battery Charging Programmes - VOLTCRAFT Charge Manager 2016 Bedienungsanleitung

12. OPERATION

a) Selection of Battery Chemistry

After inserting the first battery into chute 1-4, the following display appears:
VOLTCRAFT CM2016
================
TYPE OF BATTERY?
SLOTS S1-4: NiMH
According to the voltage of the inserted battery, NiMH or NiZn mode is suggested. For
deep-discharged batteries, the active battery chemistry may have to be changed manually.
Select the battery chemistry with the selection buttons and confirm with „OK". If no button
is pushed, the current automatic selection is assumed after about 6 seconds.
Always use the correct battery chemistry for the battery inserted.
Mixed equipment with NiMH/NiCd and NiZn batteries is not permitted! There is
a danger of damage to your batteries!
Only NiMH or NiCd batteries must be inserted into the 9 V chutes A and B.

b) Start of Battery Charging Programmes

Display after battery chemistry selection:
PARAMETERS SLOT1
>SEL-PRG
ADJ-CHA
ADJ-DIS
The input currently required is indicated b y a flashing cursor „>" in front of
„SEL-PRG" and, depending on the respective programme, in front of „ADJ-CHA" or
„ADJ-DIS".
Within the next 6 seconds, the charge program can be selected with the selection buttons,
with the time extending by another 6 seconds with every push of a button. Only after this
period will the settings be assumed.
44
CHARGE
AUTO
---mA