VOLTCRAFT Charge Manager 2016 Bedienungsanleitung Seite 49

Maintenance Charge („TRI", „TRICKLE")
Batteries discharge over time. This property is known as self-discharge.
To balance out this loss, the „Charge Manager 2016" starts the maintenance charge
programme „TRI" („TRICKLE") automatically if needed.
Of course, this does not apply if the battery was only discharged with the programme „DIS"
(„DISCHARGE"). The capacity (C) of the recharge („TRICKLE") and the time required for
this process („HH:MM") will not be indicated or summed up. Only voltage and current are
updated. Therefore, the charging capacity, if applicable the discharging capacity and the
time only refer to the programme processed previously.
Display in the overview:
1 2
TRI RDY --- ---
A NiMH
RDY CM2016
Defective battery / wrong battery chemistry („ERR", „ERROR")
If the charge or discharge process is unsuccessful, the error message „ERR" („ERROR") is
output (see chapter 15). The charger will no longer process this battery.
Display in the overview:
! 2
ERR --- --- ---
A NiMH
--- CM2016
3 4
B
---
3 4
B
---
49