Signal Tones; Overheating Protection Facility; Rating Plate; Operation And Handing - Caso W2100 2220 Originalbetriebsanleitung

Adhere to the following safety instructions in order to avoid being burnt by the hot
appliance:
ATTENTION
Risk of burning due to hot surface!
► Do not touch the surface of the ceramic hob while it is still hot ("H" is displayed)
► Do not place any objects on the hot ceramic hob.
13.1.3

Signal Tones

The appliance emits an acoustic signal after being switched on and in the event of a fault.
Please note
► The acoustic signal continues to sound until the fault has been rectified or the
appliance has been switched off.
You will find more detailed information on error messages in the chapter entitled
„Fault indications".
13.1.4

Overheating Protection Facility

The appliance is equipped with an overheating protection facility. If the temperature of the
appliance exceeds the critical limit the appropriate error message "E05" is displayed. For
safety reasons the appliance shuts off further power supply. After the cooling-down phase
the appliance can be switched off and then back on again.
Please note
► You will find more detailed information on error messages in the chapter entitled
„Fault indications".
13.1.5

Rating plate

The rating plate with the connection and performance data can be founded on the back of
the device.

14 Operation and Handing

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
Warning
► Do not leave the device unsupervised when it is in operation, so that you can intervene
quickly in the event of dangers.

14.1 Functioning and Advantages of Induction cooktops

With an induction cooktop the heat is not transferred by a heating element via the cooking
utensil to the food to be cooked, but rather the necessary heat is generated directly in the
cooking pot with the aid of induction currents.
caso W2100 / S-LINE 2100 / PRO MENU 2100 40