Design And Function; Operating Elements And Displays; Operating Panel And Display; Details On The Device - Caso Various 2000 2002 Originalbetriebsanleitung

13 Design and Function

This chapter provides you with important safety notices on the design and function of the
device.

13.1 Operating elements and displays

13.1.1

Operating panel and Display

1 On/Standby button
2 Function button – selection of directfunction
3 Selection button (+), increase of the power level, temperature or duration
4 Selection button (-), reduction of the power level, temperature or duration
5 Preset/ Timer button – setting of duration and time delayed cooking
6 Display of selected setting
13.1.2

Details on the device

This instruction and when "H" is displayed, is to warn that the ceramic hob may still be hot.
Although the induction cooker itself does not generate any heat during the cooking
process, the temperature of the cooking utensil does heat the hob!
Adhere to the following safety instructions in order to avoid being burnt by the hot
appliance:
ATTENTION
Risk of burning due to hot surface!
► Do not touch the surface of the ceramic hob while it is still hot ("H" is displayed)
► Do not place any objects on the hot ceramic hob.
13.1.3

Signal Tones

The appliance emits an acoustic signal after being switched on and in the event of a fault.
Please note
► The acoustic signal continues to sound until the fault has been rectified or the
appliance has been switched off.
You will find more detailed information on error messages in the chapter entitled
„Fault indications".
caso Various 2000 38