Design And Function; Operating Elements And Displays; Operating Panel And Display; Details On The Device - Caso W2100 Original Bedienungsanleitung

14 Design and Function

This chapter provides you with important safety notices on the design and function of the
device.

14.1 Operating elements and displays

14.1.1

Operating panel and Display

1 ON/STANDBY switch
2 Function key timer
3 Function key temperature
4 Function key level
5 Selection button (+), increase of the power stage, temperature or duration
6 Selection button (-), reduction of the power stage, temperature or duration
7 LED display
14.1.2

Details on the device

This instruction and when "H" is displayed, is to warn that the ceramic hob may
still be hot. Although the induction cooker itself does not generate any heat
during the cooking process, the temperature of the cooking utensil does heat the
hob!
Adhere to the following safety instructions in order to avoid being burnt by the hot
appliance:
ATTENTION
Risk of burning due to hot surface!
► Do not touch the surface of the ceramic hob while it is still hot ("H" is displayed)
► Do not place any objects on the hot ceramic hob.
14.1.3

Signal Tones

The appliance emits an acoustic signal after being switched on and in the event of a fault.
► The acoustic signal continues to sound until the fault has been rectified or the
appliance has been switched off.
You will find more detailed information on error messages in the chapter entitled
„Fault indications".
caso W2100
Please note
40