Operating Elements And Displays; Signal Tones; Overheating Protection Facility; Automatic Shutdown Protection - Caso Pro Slide 2100 Original Bedienungsanleitung

13.2 Operating elements and displays

1. Master On/Standby switch
2. Selection button for power stage and timer (+/-)
3. Selection button for timer
4. Booster
5. Special function, above: Keep Warm, beneath: Frying
6. Slide Control for power stages
13.2.1

Signal Tones

The appliance emits an acoustic signal after being switched on and in the event of a fault.
13.2.2

Overheating Protection Facility

The appliance is equipped with an overheating protection facility. If the temperature of the
appliance exceeds the critical limit the appropriate error message is displayed and an
acoustic signal sounds. For safety reasons the appliance shuts off further power supply.
After the cooling-down phase the appliance can be switched on again.
► Do not place any empty cookware on the cooking area. Heating an empty pot or pan
activates the overheating protection and the device turns off automatically.
13.2.3

Automatic shutdown protection

The device is equipped with an auto shut down safety protection function. If ever you forgot
to turn off your hotplate, it shuts down automatically.
Power level automatic shutdown after
1~12 2 hours
13.2.4

Rating plate

The rating plate with the connection and performance data can be founded on the back of
the device.
caso Inno Slide 2100 39