Cleaning And Servicing; Cleaning The Base Unit - Bosch MaxxiMUM MUMXX-Serie Gebrauchsanleitung

Preparation
Warning!
Never assemble the blender without
the seal on the blender holder.
Putting the blender together:
Insert blender holder with seal into

the blender jug, ensuring that the line
is under the arrow.
Attach blender holder by rotating

it as far as possible to the right.
Working with the blender
Press release button and move

multi-function arm to position 5.
Cover unused drives with drive

covers.
Remove the blender drive cover.

Attach blender jug (mark on the handle

on mark on the base unit) and turn
all the way in an anti-clockwise direction.
Add ingredients.

– Maximum amount of liquid
ingredients = 1,75 litres;
– Maximum amount of frothing
or hot liquids = 0,75 litres;
– Optimum processing amount
of solid ingredients = 100 grams.
Attach the cover and turn anti-clockwise

all the way into the blender handle.
The cover must be locked in position.
Set the rotary switch to the desired

setting.
Adding more ingredients (Fig.
Switch off the appliance with the rotary

switch.
Remove the lid and add ingredients

or
remove the funnel and gradually add

solid ingredients through the refill
opening
or
pour liquid ingredients through the funnel.

Important information
When processing liquids/liquid ingredients,
slowly increase the speed of the appliance
in stages to prevent the food from shooting
out.
Robert Bosch Hausgeräte GmbH
Fig.  After using the appliance





Fig. 
Tip: It is recommended to clean the blender
immediately after use.

Cleaning and servicing

Warning!
Do not use abrasive cleaning agents.
Surfaces may be damaged.

Cleaning the base unit

–8)




Cleaning the bowl and tools
The bowl and tools are dishwasher-proof.
Do not wedge plastic parts in the dishwasher,
as they could be permanently deformed
during the washing process!
Switch off the appliance with the rotary
switch. Wait until the blade has come
to a standstill.
Remove mains plug.
Rotate the blender in a clockwise
direction and remove.
Take the lid off the blender jug.
Rotate the lid in an anti-clockwise
direction and remove.
Clean all parts, see "Cleaning and
servicing".
Important information
The appliance requires no maintenance.
Thorough cleaning protects the appliance
from damage and keeps it functional.
Risk of electric shock!
Never immerse the base unit in water
or place under running water.
Do not use a steam cleaner.
Remove mains plug.
Wipe the base unit and drive cover
with a damp cloth. If required, use
a little detergent.
Then dry the base unit.
en
25