External Component Operations; Playing An External Component; Changing The Display Pattern - JVC KD-LH401 Bedienungsanleitung

EXTERNAL COMPONENT OPERATIONS

Playing an external component

You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. See "To select the external component to
use—Ext Input" on page 49.
1
Select the external component
(LINE IN).
• If "LINE IN" does not appear on the display,
see page 49 and select the external input
("LINE IN").
Note on One-Touch Operation:
When you press CD/CD-CH, the power automatically
comes on. You do not have to press
on the power.
2
Turn on the connected component
and start playing the source.
62
3
Adjust the volume.
4
Adjust the sound as you want.
(See pages 32 – 35.)

Changing the display pattern

By pressing D DISP, you can change the
information shown on the display.
to turn
Each time you press the button,
the display patterns change as
follows:
Clock time