ATIKA 2000 Bedienungsanleitung Seite 17

Problem
Motor does not start
Motor turns over, but does not
start
Motor starts, but becomes
blocked on encountering even
slight pressure, and
switched off via motor safety
switch.
Reduced output.
Model
Name
Motor
Motorrating P S 6 – 40 %
1
Input voltage I
Rotational speed N
On/off switch
Weight
Acoustic capacity L *
WA
Measured level of the acoustic output L
guaranteed level of the acoustic output L
Max. branch diameter
(
only for freshly cut wood
*
Guideline 2000/14/EG
• The manufacturer will supply a two years warranty after supply of the machine from the dealer's store for faults in
material and/or workmanship.
• Warranty claims, even during the warranty period, will not be accepted for damages due to incorrect handling or
inadequate packaging during return of the devices or to a non-observance of the operating instructions.
• Faulty components should be returned to the factory, postage and freight paid. Discretion for the supply of
replacements free of charge will remain with the manufacturer.
• The guarantee does not cover normal wear to: blade, counter blade and impellers, as well as the respectively associated
fasteners.
• All warranty work will be carried out by the manufacturer. The handling of repairs by third parties shall require prior
written consent of the manufacturer.
• The warranty will only apply of original spare parts are used.
• Subject to alterations due to further development.
O p e
O p e
Possible cause
no mains voltage
−
defective connection cable
−
enclosure top improperly closed
−
(safety shut-off is activated)
−
cutters blocked
−
defective capacitor
−
Extension cable too long, or cross-section
too small. Socket too far away from main
is connection, and
connection lead too small.
One edge / both edge of the knife become
blunt.
S p
S p
Motor protection switch, electrical safety cut-out, reactivation blocker
*
WA
*
WA
)
r a t i o n a l f a u l t s
r a t i o n a l f a u l t s
cross-section of
e c i f i c a t i o n s
e c i f i c a t i o n s
2000
AH 301
AC-Motor 230 V, 50 Hz, including automatic motor brake
2000 W
9,3 A
22,5 kg
40 mm
W a r r a n t y
W a r r a n t y
16
Elimination
check fuse
−
have it inspected (electrician)
−
close and bolt down enclosure top
−
correctly, remove any dirt present
switch machine off, disconnect mains
−
plug, and clean interior of machine
have machine repaired by manufacturer
−
or approved company
Extension cable at least 1,5 mm
maximum 25 m long. Cross- section of at
least 2,5 mm in longer cables.
2
The blades must be changed
2400
AH 300
2400 W
10,5 A
2800 min
-1
23,5 kg
92 dB (A)
102 dB (A)
103 dB (A)
45 mm
,
2
2500
AH 300
2500 W
11,3 A
23,5 kg
45 mm