ATIKA 2000 Bedienungsanleitung Seite 13

R e s i
R e s i
Even if used properly, residual risks can exist
even if the relevant safety regulations are complied with
due to the design determined by the intended purpose.
Residual risks can be minimised if the "Safety
information" and the "Intended usage" as well as the
whole of the operating instructions are observed.
Risk of injury to the fingers and hands, if your hand
grasps through an opening and reaches the blade
unit.
Risk of injury to the fingers and hands, when carrying
out assembly work and cleaning on the blade unit.
Injury by the chopped material spinning away near
the hopper.
Risk from electricity, by using non-standard electrical
connections.
Touching live parts of opened electrical components.
Impairment of hearing when working on the machine
for longer periods of time without ear protection.
In addition, in spite of all the precautionary measures
taken, non-obvious residual risks can still exist.
S a f e
S a f e
Before commissioning this product, read and
keep to the following advice. Also observe the
preventive regulations
association and the safety provisions applicable in
the respective country, in order to protect yourself
and others from possible injury.
Pass the safety instructions on to all persons who
work with the machine.
Keep these safety instructions in a safe place.
Machine including safety cut-out
The safety cut-out, including an automatic motor
brake, which is attached to the shredder is used
for the safety of the machine, preventing the
motor being started when the machine is open
and the rotating knives could be reached by the
operator's hand.
Repairs on the safety cut-out must be done by
the producer or by a company designated by
the producer.
Make yourself familiar with the equipment before
using it, by reading and understanding the operating
instructions.
Do not use the machine for unsuitable purposes (see
'Normal intended use' and 'Working with the garden
shredder').
d u a l r i s k s
d u a l r i s k s
w o r k i n g
w o r k i n g
of your professional
Ensure that you have stand in a secure standing
position and maintain your balance at all times. Do
not lean forward over the machine. When placing
material into the shredder, always stand on the
same level as the machine.
Be attentive. Be careful what you do. Behave
sensibly when working. Do not use the saw if you
are tired.
Wear protective goggles, gloves and noise protection
while working with the machine.
Wear suitable work clothes!
Do not wear loose-fitting clothes
−
Slip-proof shoes
−
Within his area of work the operator is responsible
for third parties.
The machine must not be operated by children or
young people under 16 years of age.
Keep children away form machine.
Never operate the machine if other persons are in
the immediate vicinity.
Never leave the saw unattended.
Keep your workplace in an orderly condition!
Untidiness can result in accidents.
Choose a working position alongside the
equipment or behind it. Never stand near the ejection
opening.
Never reach into the filling or ejection opening.
Keep your face and body away from the filling
opening.
Do not overload the machine! You work better and
safer in the given performance range.
Only operate the machine with complete and
correctly attached safety equipment and do not
alter anything on the machine that could impair the
safety.
Do not alter the revolution speed of the motor,
since this controls the safe maximum operating
speed, and protects the motor and all rotating parts
against damage due to excess speed.
Do not operate without the funnel.
Faulty or damaged parts in the device must be
replaced immediately.
Close machine properly before enabling motor.
Do not spray machine with water
(this is hazardous due to live components).
Do not leave the machine standing in the rain or
use when raining.
Store the unused machine in a dry locked place
away from the reach of children.
To prevent danger of injury to fingers during
assembly or cleaning operations hold the cutting
mechanism (see. pic. p. 15) and wear protecting
gloves.
12