Hedge Trimmer Safety Warnings; Assembling The Long-Handled Hedge Trimmer - FLORABEST FHT 600 C4 Betriebsanleitung

GB
tery pack from the power tool
before making any adjust
-ments, changing accessories, or
storing power tools. Such preven-
tive safety measures reduce the risk of
starting the power tool accidentaIly.
Store idle power tools out of the
•
reach of children and do not al-
low persons unfamiliar with the
power tool or these instructions
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
Maintain power tools. Check
•
for misalignment or binding
of moving parts, breakage of
parts and any other condition
that may affect the power tool's
operation. If damaged, have
the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and
•
clean. Properly maintained cutting
tools with sharp cutting edges are less
Iikely to bind and are easier to control.
Use the power tool, accessories
•
and tool bits etc. in accordance
with these instructions, taking
into account the working condi-
tions and the work to be per-
formed. Use of the power tool for op-
erations different from those intended
could result in a hazardous situation. •
Carefully inspect the area to be cut
and remove all wires or other foreign
bodies.
• Prior to every use, check the appliance
for obvious defects such as loose, worn
or damaged parts.
Service
Have your power tool serviced
•
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
38
Hedge trimmer safety
warnings
• Keep all parts of the body away from
the cutter blade. Do not remove cut
material or hold material to be cut
when blades are moving. Make sure
the switch is off when clearing jammed
material. A moment of inattention while
operating the hedge trimmer may result
in serious personal injury.
• Carry the hedge trimmer by the handle
with the cutter blade stopped. When
transporting or storing the hedge trimmer
always fit the cutting device cover. Proper
handling of the hedge trimmer will reduce
possible personal injury from the cutter
blades.
• Keep cable away from cutting area.
During operation the cable may be hid-
den in shrubs and can be accidentally
cut by the blade.
equipment for significant damage or
defects.
Assembling the Long-
Handled Hedge
Trimmer
Pull out the power plug before carry-
ing out any work on the equipment.
Use only original parts.
1. Unpack the device and check it
for completeness.
2. Slide the front arm (7) of the long-
B
handled hedge trimmer onto the
tubular shaft of the long-handled
hedge trimmer and turn slightly.
The safety button (8) then locks
into place. Fix the two shaft ele-
ments to the star wheel (9). Screw
the nut onto this from the threaded
rod on the star wheel (9) and
place it sideways in the holder on
If dropped, check the