Startup / Operation - BOMANN DT 348 Bedienungsanleitung

• Attach the lower door hinge and the door
support assembly at the respective opposite
appliance side. Turn in the feet accordingly.
• Replace the appliance upright again.
the fridge door on the lower hinge pin and fix
the door to the property position.
• Turn the middle hinge about 180° and trans-
fer it at the opposite side. Put the hinge pin in
the hole of the fridge door and tight the
screws of the door hinge.
• Insert the freezer door on the middle hinge pin and fix the door to the property position.
• Transfer the upper door hinge on the oppo-
site appliance side, after you have un-
screwed the hinge pin and used by the other
hinge side. Put the hinge pin in the hole of
the fridge door and tight the screws of the
hinge.
• Put on the hinge cover, which you have
removed at the beginning.
• Check if the doors are arranged vertical as well as horizontal, so that a smooth opening and closing
of the doors are ensured.
Prior to first use Prior to first use
Prior to first use Prior to first use
CAUTION: : : : CAUTION CAUTION CAUTION
After transport, the appliance should be left standing for approx. four hours before connecting to the
power supply. Nonobservance could lead to malfunction of the cooling system and causes a break-
down of the appliance.
Clean the interior of the appliance including all accessory parts located inside. Consider the instruc-
tions which we provide in the chapter "Cleaning and Maintenance".
Starting the appliance Starting the appliance Starting the appliance Starting the appliance
• Connect the appliance to the power supply;
I
nsert

Startup / Operation

Startup / Operation Startup / Operation Startup / Operation
24