Reverse The Door Opening - BOMANN DT 348 Bedienungsanleitung

• Ensure that your mains power corresponds with the specifications of the appliance. The specifica-
tions are printed on the rating label.
• Connect the mains cable to a properly installed and earthed wall outlet.
If required, the door openings can be moved from the right (supplied condition) to the left side.
WARNING: WARNING:
WARNING: WARNING:
When replacing the door stops, the appliance must be disconnected from the power supply. Always
unplug the appliance first.
CAUTION: : : : CAUTION
CAUTION CAUTION
Remove or secure the door racks and glass shelves from possible damages.
NOTE: : : : NOTE
NOTE NOTE
• When installing, ask another person to assist.
You need:
screw wrench, Phillips screwdriver as well as a thin-blade screwdriver.
•
• Remove the cover caps of the upper door
hinge. Dismount the upper door hinge by
loosening the screws. Open the freezer door
a little and take it carefully of the middle door
hinge.
• Remove the door stopper of the freezer door
by loosening the screw. Attach the door
stopper supplied accordingly on the other
door side. Place the door on a padded sur-
face to prevent it from scratches.
NOTE: : : : Keep the leftover door stopper for NOTE
NOTE NOTE
another possible door opening change.
• Dismount the middle door hinge by loosening the screws. Open the fridge door a little and take it
carefully of the lower door hinge.
• Remove the door stopper of the fridge door
and attach it on the other door side. Place
the door on a padded surface too.
• Tilt the appliance slightly backwards and block it in this position. Unscrew the feet. Dismount the
lower door hinge and the door support assembly by loosening the screws.

Reverse the Door Opening

Reverse the Door Opening
Reverse the Door Opening Reverse the Door Opening
23