Addressing; Dmx-Protocol - EuroLite LED TMH-15 Bedienungsanleitung

Addressing

The Control Board allows you to assign the DMX starting address, which is defined as the first channel from
which the LED TMH-15 will respond to the controller.
If you set the address to channel 14, the device will use the channel 14 to 26 for control.
Please, be sure that you don't have any overlapping channels in order to control each LED TMH-15 correctly
and independently from any other fixture on the DMX-chain.
If several LED TMH-15 are addressed similarly, they will work synchronically.
Press the Up/Down-buttons for setting the desired starting address. Now you can start operating the LED
TMH-15 via your lighting controller.
Note:
After switching on, the device will automatically detect whether DMX 512 data is received or not. If the data
is received, the DMX indicator beside the display will light up. If there is no data received at the DMX-input,
the control LED (DMX) does not light up.
This situation can occur if:
- the 3 PIN XLR plug (cable with DMX signal from controller) is not connected with the input of the device.
- the controller is switched off or defective, if the cable or connector is defective or the signal wires are swap
in the input connector.

DMX-protocol

CH Decimal Hexad. Percentage S/F
1
0 255 00 FF
2
0 255 00 FF
3
0 255 00 FF
4
0 255 00 FF
5
0 255 00 FF
6
0 255 00 FF
7
0 255 00 FF
0 15 00 0F
8 16 31 10 1F
32 47 20 2F 13%
48 63 30 3F 19%
Horizontal movement (PAN)
Push slider up in order to move the head horizontally (PAN).
Gradual head adjustment from one end of the slider to the other
0% 100% F
(0-255, 128-center). The head can be stopped at any position you
wish.
Vertical movement (Tilt)
Push slider up in order to move the head vertically (TILT).
Gradual head adjustment from one end of the slider to the other
0% 100% F
(0-255, 128-center). The head can be stopped at any position you
wish.
PAN/TILT speed
0% 100% F
Decreasing speed
Red
0% 100% S
Red (0=off, 255=100% red)
Green
0% 100% S
Green (0=off, 255=100% green)
Blue
0% 100% S
Blue (0=off, 255=100% blue)
White
0% 100% S
White (0=off, 255=100% white)
Color macros
0% 6%
S Blackout
6% 12%
S Red
18%
S Green
25%
S Blue
Feature
25/30 00090716.DOC, Version 1.1