Personal Protection Equipment; Use In Explosive Areas - SATA minijet 1000 H RP Betriebsanleitung

Operating instructions SATAminijet 1000 K RP, SATAminijet 1000 H RP
EN EN
• When working with the spray gun, always limit solvents, paints or
other coating media to the quantities which are required for the paint
job! Excessive material must be returned to the designated storage
areas afterwards!

6.3. Personal Protection Equipment

• When using, cleaning or maintaining the spray gun, always wear
approved breathing and eye protection equipment as well as
suitable protective gloves, overalls and safety boots!
• When using the spray gun, noise levels of 85 dB(A) may be exceed-
ed. Wear suitable hearing protection!
The painter is not exposed to vibrations while using the spray gun. Repul-
sive forces are minimal.

6.4. Use In Explosive Areas

Ex-sign
6.4.1 General
The spray gun is approved for the use / storage in explosive areas of Ex-
Zone 1 and 2.
• The following applications and operations lead to the loss
of the explosion protection and are, therefore, prohibited:
• Use of the spray gun in explosive areas belonging to ex-zone 0!
104 104
Warning! Attention!
Warning!
Equipment cat- Device category
egory
Warning! Risk of explosion!
Gas category Temperature
category