Futurelight POS-12 LED TCL POWERSTICK Bedienungsanleitung Seite 31

Setting internal programs, sound control / speed
When the display shows P, you can select the desired internal program. Please see the following table.
Mode:
P
Press the MODE button until the display shows S___. Press the ENTER button and select the desired speed
(S001 – S100, increasing speed) via the UP or DOWN buttons. Press ENTER to confirm.
Setting LED colors (0 – 100%)
When the display shows U, you can select the dimmer itensity of the LED colors from 0 to 100 % (0-255).
Please see the following table.
Mode:
r 0 – 100
g 0 – 100
U
b 0 – 100
Setting solid colors
When the display shows C, you can select the desired solid color. Please see the following table.
Mode:
C
Setting the slave mode
Setting for the master device
Adjust the desired stand-alone mode like described above.
Press the MODE button until the display shows SLA.
Press the ENTER button and adjust the A 1 via the UP or DOWN buttons. Press ENTER to confirm.
Settings for the slave devices
Press the MODE button until the display shows SLA.
Press the ENTER button and adjust the A 1 via the UP or DOWN buttons. Press ENTER to confirm.
Value:
P--1
P--2
P--3
P--4
P--5
P--6
P--7
chaser, strobe via sound control
Value:
Red (0-100%)
Green (0-100%)
Blue (0-100%)
Value:
C- 1
C- 2
C- 3
C- 4
C- 5
C- 6
C- 7
Function:
Endless loop in 7 colors,
change every 3 seconds
Endless loop in 7 colors,
fade every 3 seconds
Endless loop in 3 colors,
change every 3 seconds
Endless loop in 3 colors,
fade every 3 seconds
"Chase" program
Chaser in 7 colors
via sound control
Endless loop in 7 colors,
Function:
Function:
Red
Green
Blue
Cyan
Magenta
Yellow
White
31/40 00069076, Version 1.1