Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
Connecting Other Sources
Connecting the antenna terminals
An FM antenna cable plug can be connected directly to the unit.
Direction of broadcasting
station
FM antenna
75 Ω/ohm
COAXIAL
cable
FM indoor
antenna
(Supplied)
AM outdoor antenna
2 AM loop antenna assembly
Connect to the AM
antenna terminals.
1
2
Remove the vinyl tie
Bend in the reverse
and take out the
direction.
connection line.
4
a. Antenna placed on
a stable surface.
Mount
b. Hanging the
antenna on a wall.
Use the
installation hole to secure the antenna to a wall, etc.
AM loop antenna
(Supplied)
NOTE:
• Do not connect two FM antennas
simultaneously.
• Even if an external AM antenna is used, do
not disconnect the AM loop antenna.
• Make sure the AM loop antenna lead
terminals do not touch metal parts of the
panel.
Ground
Connection of
AM antennas
3
1. Push the lever.
2. Insert the
conductor.
3. Return the lever.
Connecting the pre-out terminals
• Use these terminals if you wish to connect external power amplifier(s) to increase the power of
the front, center, surround and surround back sound channels, or for connection to powered
loudspeakers.
• When using only one surround back speaker, connect it to the left channel.
Connecting the power supply cord
NOTE:
• Only use the AC OUTLET for connecting audio equipment. Never use it for hair driers, TVs or
other electrical appliances.
15
ENGLISH
Connecting Other Sources
Power amplifier
B
CENTER
A
SURROUND
L
L
L
R
R
R
A
SURROUND
BACK
L
L
L
R
R
R
B
SUB-
WOOFER
A
FRONT
L
L
L
R
R
R
AC outlet
(wall)
AC 230 V, 50 Hz
AC OUTLET
• SWITCHED (total capacity – 100 W)
The power to this outlet is turned on and off
in conjunction with the POWER switch on the
main unit, and when the power is switched
between on and standby from the remote
control unit.
No power is supplied from this outlet when
this unit's power is at standby. Never connect
equipment whose total power consumption
exceeds 100 W.
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
