Night Mode; Adjusting The Audio Delay - Denon AVR-190 Bedienungsanleitung

ENGLISH
Basic Operation
FUNCTION INPUT MODE
STANDARD/NIGHT

Night mode

When listening at night or at lower volumes, the night mode
improves listenability.
STANDARD/NIGHT
Press and hold the
several seconds to enter the night mode.
• Canceling night mode:
Press and hold the STANDARD/NIGHT button again.
• The night mode only works when playing program sources
recorded in Dolby Digital or DTS.
STANDARD
FUNCTION
ENTER
INPUT MODE

Adjusting the audio delay

• When watching a DVD or other video source, the picture on the
monitor may seem delayed with respect to the sound. In this
case, adjust the audio delay to delay the sound and synchronize
it with the picture.
button for
• The audio delay setting is stored separately for each input
source.
• This adjustment can be performed with the system setup
( page 38) or from the remote control unit, as described
below.
1
Select the input source.
Example: DVD
(Main unit)
2
INPUT MODE
Press the
mode to "AUTO".
3
4
CURSOR
5
6
7
• The audio delay setting does not apply when playing in the EXT.
(Remote control unit)
button to set the input
23
ENGLISH
Select Dolby/DTS Surround.
(Main unit) (Remote control unit)
Play a program source (DVD, etc.).
CURSOR D D
Press the button.
• Switch to the Audio Delay adjustment screen.
CURSOR F F G G
Press the or button to set the
delay time (0 ms ~ 200 ms).
With a movie source, for example, adjust so that the
movement of the actors' lips is synchronized with the
sound.
ENTER
Press the button to complete the setting.
IN mode or in the analog input direct, stereo mode.
Basic Operation