Listening To The Radio; Auto Preset Memory; Default Settings; Auto Tuning - Denon AVR-190 Bedienungsanleitung

ENGLISH
Basic Operation

Listening to the radio

FUNCTION BAND PRESET
POWER
ON/STANDBY SHIFT TUNING

Auto preset memory

• This unit is equipped with a function for automatically searching
for FM broadcast stations and storing them in the preset
memory.
• The "Auto tuner preset" operation can also be performed at
"System setup" ( page 37).
PRESET •
Hold the button and press the
switch on the main unit.
• The unit automatically begins searching for FM broadcast
stations.
When the first FM broadcast station is found, that station is
stored in the preset memory at channel A1.
Subsequent stations are automatically stored in order at
preset channels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1
to E8, F1 to F8 and G1 to G8 for a maximum of 56 stations.
Channel A1 is tuned in after the auto preset memory
operation is completed.
PTY
RT
RDS ON SCREEN
• If an FM station cannot be preset automatically due to poor
reception, use the "Manual tuning" operation to tune in the
station, then preset it using the manual "Preset memory"
operation.
• To interrupt this function, press the ON/STANDBY switch.

2 DEFAULT SETTINGS

POWER
A1 ~ A8
B1 ~ B8
C1 ~ C8
D1 ~ D8
E1 ~ E8
F1 ~ F8
G1 ~ G8
TUNING
TUNER
PRESET
MODE SHIFT
MEMORY BAND
Auto tuner presets
87.5 / 89.1 / 98.1 / 108.0 / 90.1 / 90.1 /
90.1 / 90.1 MHz
522 / 603 / 999 / 1404 / 1611 kHz,
90.1 / 90.1 / 90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
27
ENGLISH

Auto tuning

1
Set the input source to "TUNER".
(Main unit) (Remote control unit)
2
Watching the display, press the
select the desired band (AM or FM).
3
MODE
Press the button to set the auto tuning
mode.
4
TUNING
Press the (+) or (–) button.
Automatic searching begins, then stops when a station is
tuned in.
• When in the auto tuning mode on the FM band, the "STEREO"
indicator lights on the display when a stereo broadcast is tuned
in. At open frequencies, the noise is muted and the "TUNED"
and "STEREO" indicators turn off.
Basic Operation
BAND
button to