Dts Neo:6 Mode - Denon AVR-190 Bedienungsanleitung

Basic Operation
2 Surround parameters q
II II
Pro Logic x and Pro Logic Mode:
The Cinema mode is for use with stereo television shows and
all programs encoded in Dolby Surround.
The Music mode is recommended for stereo music and
surround-encoded stereo music sources.
The Pro Logic mode offers the same robust surround
processing as original Pro Logic in case the source content is
not of optimum quality.
The Game mode is for playing games. The game mode can only
be used with 2-channel audio sources.
Select one of the modes ("Cinema", "Music", "Pro Logic" or
"Game").
• Panorama Control:
This mode extends the front stereo image to include the
surround speakers for an exciting "wraparound" effect with
side wall imaging.
Select "OFF" or "ON".
• Dimension Control:
This control gradually adjusts the soundfield either towards
the front or towards the rear.
The control can be set in 7 steps from 0 to 6.
• Center Width Control:
This control adjusts the center image so it may be heard only
from the center speaker; only from the left/right speakers as
a phantom image; or from all three front speakers to varying
degrees.
The control can be set in 8 steps from 0 to 7.

DTS NEO:6 mode

1
STANDARD
Press the button to select the DTS
NEO:6 mode.
The mode switches as shown below each time the button
is pressed.
DOLBY PL II x DTS NEO:6
2
Play a program source.
3
SURROUND PARAMETER
Press the
select the surround parameter mode.
4
SELECT
Turn the knob, and press the
F F G G
or button to select the optimum mode for
the source.
5
SURROUND PARAMETER
Press the
CURSOR D D H H
press the or button to select the
various parameters.
6
SELECT
Turn the knob, and press the
F F G G
or button to set the various surround
parameters.
When the surround parameters are set using the buttons on
the main unit, stop operating the buttons after completing
the settings. The settings are automatically finalized and the
normal display reappears after several seconds.
7
ENTER
Press the button to finish the surround
parameter mode.
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
20
ENGLISH
2 Surround parameters w
DTS NEO:6 Mode:
• Cinema:
This mode is optimum for playing movies. Decoding is
performed with emphasis on separation performance to
achieve the same atmosphere with 2-channel sources as with
6.1-channel sources.
This mode is effective for playing sources recorded in
conventional surround formats as well, because the in-phase
component is assigned mainly to the center channel (C) and the
reversed phase component to the surround (SL, SR and SB
channels).
• Music:
This mode is suited mainly for playing music. The front channel
button to
(FL and FR) signals bypass the decoder and are played directly
so there is no loss of sound quality, and the effect of the
surround signals output from the center (C) and surround (SL,
SR and SB) channels add a natural sense of expansion to the
CURSOR
sound field.
CENTER IMAGE (0.0 to 1.0: default 0.3):
The center image parameter for adjusting the expansion of the
center channel in the DTS NEO:6 MUSIC mode has been
button, and
added.
CURSOR
ENGLISH
Basic Operation