Dolby Pro Logic Ii Ii ) Mode - Denon AVR-190 Bedienungsanleitung

ENGLISH
Basic Operation
STANDARD
SURROUND PARAMETER
II
Dolby Pro Logic x (Pro Logic
• To play in the PL II x mode, set "S. BackSp" at the "Speaker
Configuration" setting to "1sp" or "2sp".
• To play in the PL PL II x mode, set "Surround Back" at the
"Power Amp Assign." setting.
1
STANDARD
Press the button to select the Dolby
Pro Logic IIx mode.
II
• The Dolby Pro Logic indicator lights.
The mode switches as shown below each time the
STANDARD button is pressed.
II
DOLBY PL x
2
Play a program source.
For operating instructions, refer to the manuals of the
respective components.
STANDARD
SELECT
II
) mode
3
Press the
select the surround parameter mode.
4
Turn the
Lights
F F
or
the source.
When the "SB CH OUT" parameter is set to "ON". (Set "S.
DTS NEO:6
BACK" at system setup to "SMALL" or "LARGE".)
SURROUND
ENTER
PARAMETER
CURSOR
SURROUND PARAMETER
button to
SELECT CURSOR
knob, and press the
G G
button to select the optimum mode for
Display
(Pro Logic II x Cinema mode)
II
(Pro Logic x Music mode)
(Pro Logic II x Game mode)
19
ENGLISH
When the "SB CH OUT" parameter is set to "OFF". (Set
"S. BACK" at system setup to "NONE".)
Display
(Pro Logic
(Pro Logic
(Pro Logic
(Dolby Pro Logic mode)
5
SURROUND PARAMETER
Press the
CURSOR D D H H
press the or button to select the
various parameters.
See "Surround parameters q" for a description of the
various parameters.
6
SELECT
Turn the knob, and press the
F F G G
or button to set the various surround
parameters.
When the surround parameters are set using the buttons on
the main unit, stop operating the buttons after completing
the settings. The settings are automatically finalized and the
normal display reappears after several seconds.
7
ENTER
Press the button to finish the surround
parameter mode.
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
Basic Operation
II
Cinema mode)
II Music mode)
II Game mode)
button, and
CURSOR