Audio Setting - JVC DT-V9L5 Bedienungsanleitung

Menu Configuration (cont.)

Audio Setting

Settings for EMBEDDED AUDIO signals and audio level meter signal.
Item To do
SDI-1 Select Select the input through which audio is output.
SDI-2 Select
Off
Auto
Digital
Analog
HDMI Select Select the input through which audio is output.
Off
Digital
Analog
Video/Component Select Select the input through which audio is output.
Off
Analog
Embedded Audio Group* 1 Select the audio channel group of the EMBEDDED AUDIO signals.
The setting values and selectable audio channels of EMBEDDED AUDIO signals are as follows.
(G means GROUP)
1G
2G
1-2G
3G
4G
1-4G
3-4G
Level Meter Setting* 1 Specify the audio level meter display for EMBEDDED AUDIO signal.
Example of audio level meter display - Connection between the level meter position and channel
Ex: When "Horizontal" is selected for "Level Meter Display":
• The number of audio channels displayed on the level meter varies depending on the setting value of "Embedded Audio
• The audio level meter can be displayed at the top or bottom of the screen.
• When "On" is selected for "Peak Hold", the maximum value is retained a certain period when the signal level becomes
Level Meter Display Select the status of the level meter (display vertically, horizontally, or not displayed).
Channel Arrange Select how the audio channels are displayed on the level meter.
Position Adjust the vertical level meter position.
Meter Type Specify the design of the level meter.
Reference Level Select the standard input level indicated on the level meter.
Over Level Select the input level's lower limit indicated in red.
Transparent Adjust the transparency of the level meter display against the image.
Peak Hold Activates/deactivates the peak hold function of the level meter.
* 1 Memorized for each input.
16
: Does not output audio.
: Output digital audio prior to analog audio.
: Output audio from the SDI terminal.
: Output audio from the AUDIO IN terminal.
: Does not output audio.
: Output audio from the HDMI terminal.
: Output audio from the AUDIO IN terminal.
: Does not output audio.
: Output audio from the AUDIO IN terminal.
: channel(s) 1/2/3/4/1+2/3+4/1 – 4 (1G)
: channel(s) 5/6/7/8/5+6/7+8/5 – 8 (2G)
: channel(s) 1/2/3/4/5/6/7/8/1+2/3+4/5+6/7+8/1 – 4 (1G)/5 – 8 (2G)/
1 – 8 (1G+2G)
: channel(s) 9/10/11/12/9+10/11+12/9 – 12 (3G)
: channel(s) 13/14/15/16/13+14/15+16/13 – 16 (4G)
: channel(s) 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16/1+2/3+4/
5+6/7+8/9+10/11+12/13+14/15+16/1–4(1G)/5–8(2G)/9–12(3G)/13-16(4G)/
1–8(1G+2G)/1-16(1-4G)
: channel(s) 9/10/11/12/13/14/15/16/9+10/11+12/13+14/15+16/9 –12 (3G)/
13-16(4G)/9-16(3-4G)
OVER LEVEL
-20dB -10dB
Group".
maximum.
Ex: When "Vertical" is selected for "Level Meter Display":
REFERENCE
OVER LEVEL
LEVEL
-10dB -20dB
Red
Yellow
Green
REFERENCE LEVEL
Setting value
Off, Auto, Digital, Analog
Off, Digital, Analog
Off, Analog
1G, 2G, 1-2G ,3G, 4G, 1-4G,
3-4G
-10dB
-20dB
Off, Vertical, Horizontal
Line, Divide
Upper, Lower
Bar, Block
–20dB, –18dB
–10dB, –8dB, –6dB, –4dB,
–2dB
Off, Background, All
Off, On
-10dB
-20dB