Specifications; General; Lcd Panel; Input/Output Terminals - JVC DT-V9L5 Bedienungsanleitung

Specifications

General

Model name
Type
Screen size
Aspect ratio
Compliant video signal format
Format
Audio output
Operating conditions
Power requirements
Rated current
External dimensions
(excluding protruding parts)
Weight
Accessories

LCD panel

Type
Effective screen size
Number of pixels displayed
Number of colors displayed
Viewing angle (TYP.)
Brightness (TYP.)
Contrast ratio (TYP.)

Input/output terminals

VIDEO
HDMI
COMPO.
(Y, Pb/B-Y, Pr/R-Y)
E. AUDIO HD/SD SDI (IN 1)
E. AUDIO HD/SD SDI (IN 2)
E. AUDIO HD/SD SDI
(SWITCHED OUT)
AUDIO (IN)
AUDIO (MONITOR OUT)
REMOTE (MAKE/TRIGGER)
REMOTE (RS-232C)
28
DT-V9L5
Multi format LCD monitor
Type 8.2 wide format
16:10
☞ "Available signals" on page 30
HD SDI:
SD SDI:
EMBEDDED AUDIO 16CH:
Internal speaker: 1.0 W
Operating temperature: 5°C – 35°C
Operating humidity: 20% – 80% (non-condensing)
(Slightly variable depending on ambient conditions for installation.)
AC 120 V / AC 220 V – 240 V, 50 Hz/60 Hz or DC 12 V – 17 V
0.5 A (AC 120 V)
0.25 A (AC 220 V – 240 V)
1.3 A (DC 12 V – 17 V)
with the stand
Width: 217 mm
Height: 218 mm
Depth: 185 mm
3.2 kg (with the stand)
2.3 kg (without the stand)
AC power cord x 2, Power cord holder x 1, Screw x 2 (for power cord holder), Protective filter x 1,
Screw (for protective filter) x 4
8.2˝ wide, active matrix TFT
Width: 176.4 mm
Height: 110.4 mm
Diagonal: 208.3 mm
1280 x 800
16.70 million
80° (Horizontally), 80° (Vertically)
360 cd/m 2
800:1
Input/output of composite signal:
HDMI signal input (compatible with HDCP):
Analog Component signal input:
Digital signal input (compatible with EMBEDDED AUDIO signals):
Digital signal output (compatible with EMBEDDED AUDIO signals):
Analog audio signal input:
Analog audio signal output:
☞ "Using the MAKE/TRIGGER system" on page 23
☞ "Using the serial communication" on page 24
SMPTE292M
ITU-R BT.656, SMPTE259M
SMPTE299M, SMPTE272M
without the stand
Width: 217 mm
Height: 176 mm
Depth: 116 mm
1 line, BNC connector x 2, 1 V (p-p), 75 Ω
* The input (IN) and output (OUT) terminals are bridge-connected
(auto termination).
HDMI connector x 1
1 Line, BNC connector x3
Y: 1 V(p-p), 75 Ω(with sync)
PB/B-Y, PR/R-Y: 0.7 V (p-p), 75 Ω
auto detection, 2 line, BNC connector x 2
1 line switched out, BNC connector x 1
1 line, RCA connector x 1, 500 mV (rms), high impedance
2 line, RCA connector x 2, 500 mV (rms)