Signal Format - JVC DT-V21G11 Bedienungsanleitung

Audio Channel Selection
Select audio channels emitted from the speakers (L/R) and the AUDIO MONITOR OUT (OUT1(L)/OUT2(R)) terminals, when EMBEDDED AUDIO
signals come in to the SDI terminal and SDI input is selected.
You have to choose a group of selectable audio channels before the channel selection (
The setting is memorized for each input (SDI 1 and SDI 2).
1
Press or button when a menu is not displayed.
The screen for audio channel selection is displayed.
The screen for audio channel selection automatically disappears in about 30 seconds after the previous operation.
2
Press buttons to select the left (L ch) or right (R ch).
3
Press buttons to select an audio channel.
Each time you press the button, the audio channel changes according to the settings of "E.AUDIO GROUP." (
4
Press MENU button.
The screen for audio channel selection disappears.
On the Information Display
The monitor displays the information below.
Configure the show/hide setting of each item in the menu. Use the T.C. button (
Select the position of the information display (
1 Audio level meter
You can check the conditions of the EMBEDDED AUDIO signals when "LEVEL METER ch" is set to "LINE" or "DIVIDE."
Not displayed when "LEVEL METER ch" is set to "OFF." (

2 Signal format

Displayed when "STATUS DISPLAY" is set to "ON." (
For the contents displayed, see "Available signals" on page 29 and "On the signal format" on page 12.
3 Source name assigned in "CHARACTER SET."
Displayed when "SOURCE ID" is set to "ON" or "AUTO."
Displayed in large letters when "STATUS DISPLAY" is set to "OFF" or "AUTO." (
4 CRC error indication
Displayed when "CRC ERROR" is set to "ON." (
A red square is displayed when an error occurs.
5 Time code
When the input signal includes no time code, "TC – –:– –:– –:– –" is displayed (
Audio channel selection screen
Selected item
"POSITION" in "INFORMATION" on page 21).
"AUDIO SETTING" on page 16)
"INFORMATION" on page 21)
"INFORMATION" on page 21)
"E.AUDIO GROUP" in "AUDIO SETTING" on page 16).
r on page 10) to configure 5 and 6.
"INFORMATION" on page 21)
r on page 10).
page 16)
11
EN