Backlight - JVC DT-V21G11 Bedienungsanleitung

Setting the menu (cont.)
MAIN MENU
PICTURE FUNCTION
Setting for the picture quality.
Item Content
APERTURE * 1 Activates/deactivates the function at the level set in "APERTURE LEVEL."
APERTURE LEVEL * Simultaneously corrects the frequency characteristics of the RGB colors.
1
CTI Adjust the clearness of the outlines of the chrominance signal.
LTI Adjust the clearness of the outlines of the luminance signal.
I/P MODE Selects a proper mode corresponding to the input picture.
sub menu Display the sub menu which enables you to adjust the items of "PICTURE FUNCTION" while viewing the actual picture.
reset Restore the default settings for all the items in "PICTURE FUNCTION."
* 1 Memorized for each input.
BACK LIGHT
Setting value: -20 – +20
Adjusts the brightness of the display.
3G SDI LEVEL B
Selects the data stream from two HD SDI signals multiplexed when a 3G SDI LEVEL B signal comes in.
The setting value will be invalid if a 3G SDI LEVEL B DUAL LINK signal is input.
SDI DUAL LINK
Activates/deactivates the DUAL LINK function of SDI signals.
"DUAL LINK" is displayed when the setting is set to "ON." (
Set this setting to "OFF" when an SDI signal other than DUAL LINK SDI is input.
14
Setting value: DS1, DS2
Setting value: OFF, ON
"Status indication of DUAL LINK/3G SDI signal information" on page 12)
Setting value
OFF, ON
01 – 10
OFF, NORMAL, HARD
OFF, NORMAL, HARD
NORMAL, CINEMA, FIELD