JVC DT-V21G11 Bedienungsanleitung Seite 25

<Functions controlled by the MAKE/TRIGGER system>
Display
TALLY SEL Selects the color of the tally lamp
SDI 1 Changes the input to "SDI 1"
SDI 2 Changes the input to "SDI 2"
DVI Changes the input to "DVI"
Display Functions to be controlled
COMPO. Changes the input to "COMPO."
VIDEO Changes the input to "VIDEO."
3G-B.DS Selects the data stream of "3G SDI LEVEL B"
DUAL LINK Turns on or off "SDI DUAL LINK"
A.MARKER The area marker indication
S.MARKER The safety marker indication
FRAME Indication of the area of the specified aspect ratio
C.MARKER The center marker indication
MARK.SEL Selects the items of "MARKER" *
ASPECT Changes the aspect ratio
1:1 Displays in 1:1 mode
STATUS Status display *
L.METER Audio level meter display
TIME CODE Time code display
SOURCE ID
"SOURCE ID" in "INFORMATION" on page 21
WAVE FORM Displays the wave form monitor (Normal or Difference)
VECTOR Displays the vector scope
COLOR OFF Color off
SCR CHECK Screens check
I/P MODE Change a mode according to the input picture
MUTING Muting on/off
DIMMER Change the intensity of the button lamps
−−− No function
* 3 Selects which functions in "MARKER" are activated, non-"R-" items or "R-" items (
* 4 Displays the information shown when INPUT SELECT button of the current input is pressed (
with the MAKE system, the information is displayed only at the moment of short-circuiting.
* 5 While controlling with the MAKE system, the level meter is switched between displayed (short-circuiting) and hidden (opening). When "LEVEL METER
ch" is set to "OFF," the level meter is not displayed ("NO EFFECT" appears). While controlling with the TRIGGER system, the pattern of the audio
channel display is switched.
* 6 While controlling with the MAKE system, the available set-up options will be the setting value currently selected in "SOURCE ID" ("ON" or "AUTO"
[short-circuiting]) and "OFF" (opening). While controlling with the TRIGGER system, uses the same set-up option as those in the SET-UP MENU (
"SOURCE ID" in "INFORMATION" on page 21).
* While controlling with the MAKE system, the wave form monitor and vector scope is switched between displayed (short-circuting) and hidden
7
(opening) regardless of the "AUTO OFF" setting in the MAIN MANU. While controlling with the TRIGGER system, the screen is switched in the same
way as when pressing the SCOPE button (
monitor is displayed.
* 8 While controlling with the MAKE system, the screen is switched between normal screen (opening) and blue screen (short-circuiting). While
controlling with the TRIGGER system, the screen changes in the same way as when pressing SCREENS CHECK button (
Must be controlled with the TRIGGER system. The mode changes in the order of "NORMAL" \ "CINEMA" \ "FIELD" (This function cannot be
* 9
controlled with the MAKE system).
You cannot assign the same function to different pin terminals.
The TRIGGER system switches each function by short-circuiting the pin terminal for about 1 second and opening it.
Functions to be controlled
3
4
e on page 10). If the wave form monitor and vector scope are input at the same time, the wave form
Opening
Green
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
DS1
Off
Off
Off
Off
Off
Non-"R-" items
4:3
Off
"On the Status Display" on page 12
Off
Color
Off
NORMAL
—
"MARKER" on page 15).
"On the Status Display" on page 12). While controlling
Short-circuiting
Red
Valid
Valid
Valid
Valid
Valid
Valid
DS2
On
On
On
On
On
"R-" items
16:9
On
*
5
On
*
6
*
7
Monochrome
*
8
*
9
On
DARK
—
q on page 10).
23
EN