Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. OPERATION
The operation of the two players is identical.
Switching on/off
1
Switch on the CMP-2000 with the
POWER button. The red power indicator
lights.
• After a short initialization process (indication
"Welcome") the unit will automatically detect
if a CD is inserted (indication "Reading... ").
• If a CD is inserted, the display will shortly
indicate the total number of titles and the
total remain time followed by information
concerning the first title after the read-in.
• If no CD is inserted "No Disc" will be
displayed.
2
Prior to switching the unit off, always
terminate the playback with the button [►II].
Inserting a CD
1
To insert a CD, open the CD tray with the
button [ ].
• The display will show "Open".
2
Insert the CD with the lettering facing
upwards and close the CD tray again with
the button [ ].
• The display will show "Close".
Loading and removing USB devices
1
For the use of USB devices, USB port 1 is
provided at the front and USB port 2 at the
rear panel. Insert USB devices here. To
remove a USB device, disconnect it from the
USB port.
• Prior to removing a USB device, set the unit
to pause. Otherwise damage or loss of data
may occur.
2
To switch from the CD to a USB device,
press the selector switch SOURCE SELECT.
• The unit must be in pause mode.
• The LEDs will verify which source is active.
• Both drives can access the same USB
medium simultaneously and play titles in
parallel.
• First, the display shows "Connecting" and
after the read-in (indication "Reading...")
information concerning the first title will
follow.
• If no device is inserted, "Please insert
memory device" will be displayed.
Regarding USB devices
• This unit supports USB devices and memory
cards with the file system FAT32 and with a
capacity up to 32 GB.
• This unit supports MSC (Mass Storage Class)
USB storage devices 1.0, 1.1, 2.0 including
external portable flash memory devices and
digital audio players. However, hard discs,
optical discs such as external CD/DVD drives
will not be recognized. Depending on the
device used, proper playback may not be
possible with all USB devices.
• If a data carrier is not recognized at the first
try, remove it and insert it again.
Selecting titles and folders
With the press control TRACK [
select titles and folders.
1
For browsing the titles, turn the press control
TRACK [
• Title number and title name (MP3 files only)
are indicated in the display.
• If you keep the control pressed while turning
it at the same time, you can jump 10 titles
forward or backward.
2
For browsing the folders, first press the
button FOLDER [] to activate the folder
selection mode. The control LED above the
button lights up. Then turn the press control
TRACK [
• The folder number and name are indicated in
the display.
• If you keep the control pressed while turning
it at the same time, you can jump 10 folders
forward or backward.
• To switch back to the title selection mode
press the button FOLDER [
control LED extinguishes.
41/52
], you can
].
] to browse the folders.
] again. The
00074823.DOC, Version 1.0
Werbung
Inhaltsverzeichnis
Fehlerbehebung
