Starting Playback/Pause; Fast Forward And Reverse; Precise Selection Of A Spot - Omnitronic CMP-2000 Bedienungsanleitung

Starting playback/pause

1
Press the button [►II], to start playback.
• The display indicates ►.
• During playback, the yellow LED lights.
• The starting point
automatically be stored in the memory as the
cue point. The unit will return to this cue
point by shortly pressing the button CUE.
2
Playback can be interrupted at any time with
the button [►II].
• The display indicates II and the yellow LED
starts flashing.
• To continue, press the button [►II] once
again.
• Pressing the button CUE during playback
also interrupts the playing and returns the
title to the cue point.

Fast forward and reverse

The buttons and
 
[ ] [
fast forward and reverse. For fast forward, keep
the button pressed, for fast reverse keep the

[ ]
button pressed.

[ ]
• The longer you keep the buttons pressed the
faster is the search speed.

Precise selection of a spot

The jogdial can be used for precisely selecting a
spot to one frame (1/75 second). For this, select
the operating mode Pitch Bend with the button
JOG MODE and set the unit to pause with the
button [►II]. Then use the jogdial to go to the
precise spot.
• After turning, the current spot is constantly
repeated until playback is started with the button
[►II].
of the title will
SEARCH are used for
]
42/52 00074823.DOC, Version 1.0