Advanceced Functions; Pitch Adjustment; Activating Master Tempo; Matching The Beat Between Two Titles (Pitch Bend) - Omnitronic CMP-2000 Bedienungsanleitung

8. ADVANCECED FUNCTIONS

Pitch adjustment

The playback speed can be adjusted variably up
to ±100 % with the pitch slide control (in MP3
mode up to ±16 %).
1
First select the adjusting range with the
button % [PITCH ON]. Each actuation of the
buttons switches the unit between 4 %, 8 %,
16 %, and 100 %.
• The corresponding LED lights up.
• When 100 % is selected, all LEDs light up.
2
Long actuation of the button % [PITCH ON]
activates the pitch slide control and the
control LED above the button lights up (basic
setting).
3
Then slide up the pitch control to decrease
the pitch and slide it down to increase the
pitch.
• The display shows the percentage deviation
from the standard speed.
• The control locks into place in mid-position.
In this position a title is played at standard
speed.
4
Tip: Decreasing the playback speed to a
maximum of -100 % causes a standstill of
the title. This effect corresponds to the
stopping of an analog turntable.

Activating Master Tempo

With the change of speed, the tonal pitch is also
changed proportionally. However, with the Master
Tempo function activated, the tonal pitch will
remain constant. To activate the Master Tempo
press the button [ ] KEY LOCK.
• The control LED above the button lights up and
the display indicates .
Matching the beat between two titles
(Pitch Bend)
With the function pitch bend, the beat of a title on
player 1 can be matched (synchronized) to the
beat of a title on player 2 or vice versa. Thus the
rhythm will not be interrupted while crossfading
from one title to another. Unlike the adjustment
with the pitch slide control this function will
temporarily increase or decrease a title's speed
during replay.
1
First use the pitch slide control to adjust the
same number of beats (BPM) for both music
pieces.
2
Select the operating mode Pitch Bend for the
jogdial with the button JOG MODE. Then
synchronize the beats of the two music
pieces by turning the jogdial.
• The change of speed depends on the turning
speed of the jogdial: Rotating the wheel in a
clockwise direction will increase your title
speed and
counterclockwise direction will decrease your
title speed.
• As soon as you stop turning the wheel the
BPM will automatically return to normal.
3
Tip: If the wheel is continuously turned in a
counterclockwise direction, the playback
speed will decrease to a maximum of -100
%, i.e. the standstill of the title. This effect
corresponds to the stopping of an analog
turntable.
4
Alternatively to the jogdial you can also use
the buttons PITCH BEND for matching the
beat. As long as the button [+] or [–] is kept
pressed, the title is played faster or slower.
• The deviation from the standard speed
depends on the pitch adjustment range
selected (up to 100 % for audio CDs; up to
16 % for MP3 files).
• As soon as you release the buttons PITCH
BEND the BPM will automatically return to
normal.
44/52
rotating the wheel
00074823.DOC, Version 1.0
in a