Intended Use - VOLTCRAFT SEM6500 Wi-Fi Bedienungsanleitung

Intended use

The product is an energy consumption meter with one receptacle.
The maximum permissible loads are listed in the technical data
and must be observed in operation.
The product must be connected to a standard power socket with
earth contact.
The product is designed for indoor use only. Keep it away from
water and high-humidity sources and the areas where these con-
ditions occur (e.g. bathroom).
The product supports software and manual operation.
In software mode:
• you connect the product to the cloud via Wi-Fi
• you use the mobile app to control the receptacle
In manual mode:
• you use the push button to switch the receptacle on and off
Please read the operating instructions carefully and do not discard
them. If you pass the product on to a third party, please hand over
these operating instructions as well.
Any use other than that described above could lead to damage
to this product and involves the risk of short circuits, fire, electric
shock, etc. No part of the product may be modified or reconfig-
ured! Please observe the safety instructions at all times!
19