Renkforce RUSD-1803 Bedienungsanleitung Seite 42

Function of the keys
BND / ID3 button (3)
By pressing this button you can select the band range of the radio unit.
The following 3 FM ranges are available:
FM1 > FM2 > FM3
On each of the three band ranges, 6 stations can be stored on the station buttons 1-6 (13-18).
button (6) and
With these buttons the receiving frequency can be changed to adjust stations in radio operation.
Pressing a button briefly starts the automatic station scan.
The auto-scan only stops at the next station that can be received well.
By pressing a button longer, you activate the manual scan.
MANUAL appears on the display.
The frequency is changed in this mode until the respective button is released. By shortly pressing a button,
the frequency is changed step by step.
If the buttons are not pressed for a longer period of time, the device changes to the automatic
station scan. AUTO will appear briefly in the display.
Station buttons 1-6 (13-18)
If you shortly press these buttons, you can select a station you have pre-set. If you want to store a station
you are listening to, simply press the desired button for about three seconds.
Every one of the three FM ranges (FM1-3) has six station buttons. Therefore you can assign 18
station buttons.
F/PS button (7)
• By pressing and holding this button the automatic station saving function is activated. All stations that
can be received well are automatically saved to the station buttons 1-6 (13-18).
After this procedure, the stored stations are each played for a few seconds.
• If you press this button briefly only, all saved stations are played for a few seconds (same function as
after automatic saving of stations).
To select a station for permanent playback, briefly press the F/PS button (7) again.
42
button (9)