Radio Mode - Renkforce RUSD-1803 Bedienungsanleitung

MASK DPI/ALL
Response of the device when scanning for radio stations:
MASK DPI: Alternative frequencies with different programme information (PI) are not included.
MASK ALL: Alternative frequencies with different programme information (PI) and alternative
frequencies with a high signal strength but without RDS information are not included.
c) Radio mode
Receiving concept RDS
The abbreviation RDS stands for Radio Data System, i.e. inaudible, additional information codes are trans-
mitted by the FM RDS station.
With the Renkforce Car Radio, you have a device that is able to evaluate these coded data that are trans-
mitted by most of the radio stations.
The following important data is transmitted:
- Program Identification (PI)
- Traffic Program (TP)
- Traffic Announcement (TA)
- Program Service (PS)
- Alternative Frequencies (AF)
- Program Type (PTY)
- Clock time (CT)
Program Identification (PI)
These data help the receiver to identify a station. It enables the radio to differentiate between areas where
the same programme is transmitted. The car radio only switches to a stronger station when the reception
gets weaker, if the stronger station transmits the same programme identification.
Traffic Programme (TP)
This signal enables the receiver to detect that a station with a traffic programme is being received.
Traffic Announcement (TA)
With this signal the receiver can detect a traffic announcement and interrupt the current replay of a diffe-
rent audio source.
Program Service (PS)
This information tells the receiver which station it is receiving. It is directly replayed in the display of the
car radio, e.g. BAYERN 3.
40