Manual Selection; Resetting Handset - Topcom Butler 1410C Bedienungsanleitung

Butler 1410C
- 'BASE XXXX?' appears on the display (xxxx = numbers of the base unit to
which the handset is subscribed)
- Press 'AUTO' and then OK.

4.17.2. Manual selection

If you set the handset to 'manual selection', the handset will only choose the
base unit you have set.
- Repeatedly press the Menu key until 'TELEPHONE' appears.
- Press the OK key twice.
- Repeatedly press the Menu key until 'SELECT BASE' appears.
- Press 'OK' or 'BACK' to go back.
- 'BASE XXXX?' appears on the display (xxxx = numbers of the base unit to
which the handset is subscribed).
- Enter the number of the base unit (1-4) and press OK.
Notes:
- Before you can select a base unit, the handset must first be subscribed with that base
unit.
- If the base unit is not found, the handset automatically goes back to its original base
unit.

4.18. Resetting Handset

Here the factory settings of the handset are set again.
The factory settings are:
PIN:
Internal and external ringer melody:
Key tones:
Volume:
Handset name:
- Repeatedly press the Menu key until 'TELEPHONE' appears.
- Press the OK key.
- Repeatedly press the Menu key until 'SUBSCRIBE' appears.
- Press 'OK' or 'BACK' to go back.
- Repeatedly press the Menu key until 'RESET HS' appears.
- Press 'OK' or 'BACK' to go back.
- Enter the handset PIN code (0000) and press OK.
- 'RESET?' appears on the display.
- Press 'OK' or 'BACK' to go back.
0000
1, volume = high
On
Volume 2
Handset 1
69 69 69 69