Out Of Range Warning; Receiving A Call; Receiving An Outside Call - Topcom Butler 1410C Bedienungsanleitung

Butler 1410C
The base unit is now in subscribing mode. For 1 minute, the base unit is in
subscribing mode and you have to do the following to subscribe the handset:
- Repeatedly press the Menu key until 'TELEPHONE' appears.
- Press the OK key.
- Repeatedly press the Menu key until 'SUBSCRIBE' appears and press the OK
key.
- Repeatedly press the Menu key until "SUBSCRIBE HS" appears and press OK.
- Enter the number of the base unit to which you want to subscribe the
handset 'BASE?' (1-4). Use the number keypad.
- Press the OK key.
- 'SEARCHING' appears on the display.
- The RFPI code (each base unit has an RFPI code) appears on the display
alternating with the text 'FOUND BASE'.
- Press the OK key.
- 'BS PIN?' appears on the display. Enter your 4-figure base unit PIN code
(standard base unit PIN code is '0000'). Use the number keypad.
- Press the OK key.
- The handset is subscribed to the base unit.

4.5. Out of Range Warning

If the handset is out of range of the base unit, a warning signal will sound.
- 'OUT OF RANGE' appears on the display.
- Go closer to the base unit
- As soon as you are back within range of the base unit, a signal sounds and
the handset number appears again.
Note: The following functions are only available if the handset has
been subsribed to a Butler 1410 base unit! Certain functions will not
work completely ore not all, when another base unit is being used.

4.6. Receiving a Call

4.6.1. Receiving an outside call

- All subscribed handsets will ring when you receive a call. The base unit
doesn't ring, only the handset!
- The telephone number of the caller appears on the display if you have Caller
ID service (CLIP). Consult your telephone company. The name of the caller
also appears on the display if:
• the name is programmed into the Telephone Book.
• the network sends the name together with the telephone number.
- Press the Line key to accept the outside call.
59 59 59 59