Programming The Handset Pin Code; Changing Handset Name; Emergency Call (Babycall) - Topcom Butler 1410C Bedienungsanleitung

Butler 1410C

4.16.5. Programming the Handset PIN code

Certain functions such as handset reset are only available if you know the PIN
code of the telephone. Thanks to this secret code, settings are screened that
only you can change. The PIN code has 4 digits. The default PIN code setting is
'0000'.
Caution: Do not forget your personal PIN code.
- Repeatedly press the Menu key until 'TELEPHONE' appears.
- Press the OK key twice.
- 'HANDSET RING' appears on the display.
- Repeatedly press the Menu key until 'HS PIN' appears.
- Press 'CHANGE' to change the setting or 'BACK' to go back.
- 'HS PIN?' appears on the display.
- Enter the old pin code (0000) and press OK. If a wrong pin code is entered,
the menu is left.
- With a correct pin code the telephone asks you to enter the new pin code
'NEW PIN?'.
- Enter the new pin code and press OK.

4.16.6. Changing handset name

You can give each handset a name which then appears on the display (in
standby), together with the handset number. This means one can easily identify
each handset:
- Repeatedly press the Menu key until 'TELEPHONE' appears.
- Press the OK key twice.
- 'HANDSET RING' appears on the display.
- Repeatedly press the Menu key until 'HS NAME' appears.
- Press OK' or 'BACK' to go back.
- Press 'CHANGE' to change the name.
- Enter the new name using the alphanumeric keyboard and use the '
>
' ' keys to move the cursor.
- Press 'SAVE' to confirm.

4.16.7 Emergency call (babycall)

You can programme the handset so that one specific number is automatically
dialled when any key is pressed or when the handset is put into or taken out
of the charger. Incoming calls can simply be answered!
67 67 67 67
<
' and