Base Unit - Topcom Butler 1410C Bedienungsanleitung

Butler 1410C
- Repeatedly press the Menu key until "SUBSCRIBE HS" appears and press OK.
- Enter the number of the base unit to which you want to subscribe the
handset 'BASE?' (1-4). Use the number keypad.
- Press the OK key.
- 'SEARCHING' appears on the display.
- The RFPI code (each base unit has an RFPI code) appears on the display
alternating with the text 'FOUND BASE'.
- Press the OK key.
- 'BS PIN?' appears on the display. Enter your 4-figure base unit PIN code
(standard base unit PIN code is '0000'). Use the number keypad.
- Press the OK key.
- The handset is subscribed to the base unit.
4.3. Subscribing a Butler 1410C handset to Butler 575/575+ &
Cocoon100/100+ & Butler 2000 base unit
Press the Paging key on the Butler 575/575+ or Cocoon100/100+ or Butler
2000 base unit for approx. 15 seconds until you hear a beep. The base unit is
now in subscribing mode. For 1 minute, the base unit is in subscribing mode
and you have to do the following to subscribe the handset:
- Repeatedly press the Menu key until 'TELEPHONE' appears.
- Press the OK key.
- Repeatedly press the Menu key until 'SUBSCRIBE' appears and press the OK
key.
- Repeatedly press the Menu key until "SUBSCRIBE HS" appears and press OK.
- Enter the number of the base unit to which you want to subscribe the
handset 'BASE?' (1-4). Use the number keypad.
- Press the OK key.
- 'SEARCHING' appears on the display.
- The RFPI code (each base unit has an RFPI code) appears on the display
alternating with the text 'FOUND BS'.
- Press the OK key.
- 'BS PIN?' appears on the display. Enter your 4-figure base unit PIN code
(standard base unit PIN code is '1590'). Use the number keypad.
- Press the OK key.
- The handset is subscribed to the base unit.
4.4. Subscribing a Butler 1410C handset to a Butler

1000/1010/1200/1210 base unit

Press the Paging key on the Butler 1000/1010/1200/1210 base unit for approx.
10 seconds until the Line/Charge indicator on the base unit begins blinking.
58 58 58 58