Disposal Of Flat Batteries; Troubleshooting - VOLTCRAFT VC-440 E Bedienungsanleitung

b) Disposal of Flat Batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries/rechargeable batteries. Dis-
posing of them in the household waste is prohibited!
Rechargeable batteries containing harmful substances are marked with the following symbol, which points
out that they are not allowed to be disposed of in the domestic refuse.
The descriptions for the respective heavy metals are: Cd = cadmium, Hg = mercury, Pb = lead.
Y ou may return used rechargeable batteries free of charge at the official collection points of your commu-
nity, in our stores, or wherever rechargeable batteries are sold.
You thus fulfil the legal requirements and make your contribution to protecting the environment!

13. Troubleshooting

In purchasing the DMM, you have acquired a product designed to the state of the art and operationally reli-
able. Nevertheless, problems or errors may occur.
For this reason, the following is a description of how you can easily remove possible malfunctions yourself:
Always observe the safety information!
Error
The multimeter does not work.
No measured value change.
No measurement possible in the A
measurement range
No measurement possible in the
mA/µA measurement range
Repairs other than those described above should only be carried out by an authorised specialist. If
you have any questions about handling the meter, our technical support is available.
Possible cause
Is the battery dead?
Is the wrong measuring function
activated (AC/DC)?
Were the wrong measuring jacks
used?
Is the Hold function activated?
Is the fuse of the A measuring
range defective?
Is the fuse of the mA/µA measure-
ment range defective?
Remedy
Check the status. Replace the
battery.
Check the display (AC/DC) and
switch the function if required.
Check the socket assignment or cor-
rect seat of the measuring lines.
Deactivate the Hold function.
Check the 11 A fuse F2.
Check the 600 mA fuse F1.
57