VOLTCRAFT VC-440 E Bedienungsanleitung Seite 62

Signal level:
≤100 kHz: 200 mV - 30 Vrms
>100 kHz - <1 MHz: 600 mV - 30 Vrms
≥1 MHz - <10 MHz: 1 V - 30 Vrms
10 MHz: 1,8 V - 30 Vrms
Frequency "Hz" (electrical, subfunction of A and V)
Range
40 - 400 Hz
Signal level: Sensitivity at least 200 mVrms
Pulse ratio "%"
Range
0.1 – 99.9 %
Display of the positive half-wave in %
Frequency range: <10 kHz
Input sensitivity >2 Vpp (10.0% - 95.0%)
Diode test
Test voltage
approx. 3.5 V/DC
Overload protection: 1000 V; test current: 1.2 mA typ.
Acoustic continuity tester
Measurement range
600 Ω
≤10 Ω permanent sound; ≥50 Ω, the buzzer won´t beep
Overload protection: 1000 V
Test voltage approx. 1 V
Test current <0.25 mA
Do not exceed the maximum permitted input values. Do not touch any circuits or parts of circuits if
they may be subject to voltages higher than 33 V/ACrms or 70 V/DC! Danger to life!
62
Resolution
0.1 Hz
Resolution
0.1 %
Resolution
0.001 V
Resolution
0.1 Ω
Accuracy
Not specified
Accuracy
Not specified