Herunterladen Inhalt Inhalt Diese Seite drucken

Productbeschrijving; Voorgeschreven Gebruik - VOLTCRAFT VC-31 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Introduction
Dear Customer
In purchasing this Voltcraft
good decision for which we should like to thank you.
You have acquired an above-average quality product from a brand
family which has distinguished itself in the field of measuring, charg-
ing and network technology by particular competence and perma-
nent innovation.
With Voltcraft
®
, you will be able to tackle difficult tasks, no matter
whether you are an ambitious hobbyist or a professional user. Volt-
craft
®
offers you reliable technology at a very favourable cost-per-
formance ratio.
We are certain: Starting to use Voltcraft will also be the commence-
ment of a long, successful relationship.
We wish you much enjoyment with your new Voltcraft
The VC-31 was constructed according to state-of-the-art. This
device meets the requirements of the applicable European and
national guidelines. Its conformity has been certified and the corre-
sponding declarations and documents can be obtained from the
manufacturer. To maintain the specifications and to ensure risk-free
operation, the user should comply with the following operating
instructions.
14
®
product, you have made a very
®
product!

Productbeschrijving

De Kombitest VC-31 is omwille van zijn afneembare gordelclip met
magnetische houder en zijn stevige behuizing met rubberen
bescherming de ideale tester voor elektrische installaties. Hij mag in
geen enkele gereedschapskist ontbreken. De mogelijkheid een
meetleiding te bevestigen aan de achterzijde van de VC-31 verge-
makkelijkt de metingen.
De VC-31 kan worden gebruikt voor de volgende metingen:
- Meten van de continuïteit resp. het meten van weerstanden tot
10kohm
- Meten/controleren van wissel- en gelijkspanningen tot 400V
- Controleren van de polariteit van gelijkspanningen van 1,5 tot
400V/DC
- Controleren van FI-beschermingsschakelaars (ELCB) met een
nominale foutstroom <40mA
- Controleren van fase (L), nulleider (N) en beschermingsgeleider (PE)
- Testen van halfgeleiders zoals transistoren, diodes enz.
De indicatie gebeurt akoestisch door een zoemer, en optisch met
een LED. Door de toonhoogte en de frequentie van de zoemer kan
onderscheid worden gemaakt tussen continuïteit, gelijk- en wissel-
spanning.

Voorgeschreven gebruik

Test- en meetapparaat voor:
- Gelijk- en wisselspanningen tot 400V in overspanningscategorie
CAT III 400V
- Continuïteit, weerstanden, halfgeleiders tot 10kohm
- Sneltest van FI-beschermingsschakelaars tot 40 mA (geen genor-
meerde meting)
Het gebruik is uitsluitend toegestaan in een droge omgeving; con-
tact met vocht moet absoluut worden voorkomen! Als spannings-
bron mag uitsluitend een 9V-blokbatterij worden gebruikt.
35

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis