Inhaltsverzeichnis
Werbung
11.4.4 Rotor length options
Rotor length is one of the parameters which define the overall motor lengths. Rotor length
depends on the number of permanent magnet rows and magnet size. Kollmorgen defines the
rotor length with a single number (1 to 5) from short to long. Within every rotor length several
windings are defined. Drawings can be found in chapter "Dimension Drawings" (➜ # 73).
11.4.5 Winding type options
Kollmorgen defines windings with a single character (A to Z) from low currect to high current
windings. Technical data referring to the windings can be found in chapter Technical Data
(➜ # 65).
11.4.6 Cable length options
Due to protection class requirements for hygienic applications a fixed cable version is
recommended rather than a connector version for AKMH motors. Cable version has to be
ordered with defined cable length.
Kollmorgen offers cable length in increments of 1 m. Minimum cable length is 1 m, maximum
cable length are 15 m. Coding is hexadecimal (1, 2, 3, ..., 9, A to F). See table below.
Total motor weight depends on the motor type and cable length. Weight of 1m cable is
0.32kg, this value has to be added to motor weight. The weight data of chosen motor type is
given in the Technical data section. (➜ # 65)
Cable length options
Model number
Length
description
(m)
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
AKMH Installation | 11 Package
Model number
Length
description
(m)
9
9
A
10
B
11
C
12
D
13
E
14
F
15
Kollmorgen | June 2015
47
Werbung
Inhaltsverzeichnis
Fehlerbehebung
