Frame Size, Flange And Shaft Options - Axis AKMH Betriebsanleitung

11.4.1 Frame size, flange and shaft options

Dimension drawings can be found from chapter "Dimension Drawings" (➜ # 73).
Framesize Flange
2
2
3
3
4
4
5
5
6
6
1) acc. to EN 60034-7......2) acc. to EN 42955......3) acc. to EN 50347
Mount/Shaft availability
Motor
AKMH2
AKMH3
AKMH4
AKMH5
AKMH6
Flange mounting (flange types Ax, Gx):
The basic style for flange mounting is style IM B5 according to EN 60034-7.
Mount the o-ring (FDA approved) for flange sealing.
Mounting styles IM V1, IM V3 and IM B5 with cable bushing on top are not allowed in
hygienic applications. Mount the cable bushing in the "down" part of motor to promote
drainage after washdown. Add a strain relief to the cable if necessary.
Flange Pilot
type diameter diameter
∅ ∅
A, C 79 mm 40 mm
G, H
A, C 89 mm 60 mm
G, H
A, C 114 mm 80 mm
G, H
A, C 148 mm 110 mm
G, H 132 mm 95 mm
A, C 186 mm 130 mm
G, H
AC AN CC
x x x
x x x
x x x
x x x
x x x
AKMH Installation | 11 Package
Shaft Accuracy Accuracy
1)
diameter pilot shaft
∅
11 mm j6
in development
14 mm j6
in development
19 mm j6
in development
24 mm j6
24 mm j6
32 mm j6
in development
Mount/Shaft
CN GC GN
x
x
x
x x x
x
Kollmorgen | June 2015
Tolerance
2) 3)
class pilot
k6 N
k6 N
k6 N
k6 N
k6 N
k6 N
HC HN
x x
45