Handling - Axis AKMH Betriebsanleitung

10.5 Handling

Transport
Climate category 2K3 according to EN61800-2, IEC 60721-3-2
l
Temperature: -25...+70°C, max. 20K/hr change
l
Humidity: rel. humidity 5% - 95% , no condensation
l
Only by qualified personnel in the manufacturer's original recyclable packaging
l
Avoid shocks, especially to the shaft end
l
If the packaging is damaged, check the motor for visible damage. Inform the carrier and, if
l
appropriate, the manufacturer.
CAUTION
The motor should not be picked up by the cable! The cable bushing could
come loose or allow for contamination to get inside the motor, if the cable
must support the weight of the motor. This could lead to electrocution
hazard due to failure of electrical terminations.
Packaging
Cardboard packing with Instapak
l
special waste collection points.
You can return the plastic portion to the supplier (see "Disposal").
l
Motor
type
AKMH2
AKMH3
AKMH4
If packages are being stacked, they must be in the horizontal orientation.
Storage
Climate category 1K4 according to EN61800-2, IEC 60721-3-2
l
Storage temperature- 25...+55°C, max. variation 20K/hr.
l
Humidity rel. humidity 5% - 95%, no condensation
l
Store only in the manufacturer's original packaging
l
Max. stacking height see table in chapter "Packaging"
l
Storage time unlimited
l
®
foam cushion. Recycling of foam is possible on
Packing Max. stacking
height
Cardboard 7
Cardboard 6
Cardboard 6
AKMH Installation | 10 Safety
Motor Packing
type
AKMH5 Cardboard/
wooden crate
AKMH6 Wooden crate
Kollmorgen | June 2015
Max. stacking
height
6
6
41