Herunterladen Inhalt Inhalt Diese Seite drucken

Disposal; A) General Information; Batteries And Rechargeable Batteries; Troubleshooting - VOLTCRAFT VC275TRMS Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

12. DISPOSAL

a) General Information

The product does not belong in the household waste!
Dispose of the product according to the relevant statutory regulations at the end of its service life.
Remove any inserted battery and dispose of it separately from the product.
b) Batteries and rechargeable batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries/rechargeable batteries.
Disposing of them in the household waste is prohibited.
Batteries and rechargeable batteries containing hazardous substances are marked with the adjacent
symbol to indicate that disposal in the household waste is prohibited. The designations for the decisive
heavy metals are: Cd = cadmium, Hg = mercury, Pb = lead. (The names are indicated on the batteries,
e.g. below the rubbish bin symbol shown on the left).
You can return used batteries/rechargeable batteries/coin cell batteries free of charge at the official collection points
of your community, in our stores, or wherever batteries/rechargeable batteries/coin cell batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the environment.

13. TROUBLESHOOTING

In purchasing the DMM, you have acquired a product designed to the state of the art and operationally reli-
able. Nevertheless, problems or errors may occur.
For this reason, the following is a description of how you can easily remove possible malfunctions yourself:
Always observe the safety information!
Error
The multimeter
does not work.
No measured value
change.
Display "ErrE"
Repairs other than those described above must only be carried out by an authorised specialist. If
you have any questions about handling the meter, our technical support is available.
Possible cause
Is the battery dead?
Is the wrong measuring function activated
(AC/DC)?
Were the wrong measuring sockets used?
Is the fuse of the 10 A measuring range
defective?
Internal memory fault
Remedy
Check the status.
Replace the battery.
Check the display (AC/DC) and switch
the function if required.
Compare the connection to the display.
Check the 10 A fuse.
Service required.
51

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis