Speakers Settings - Pioneer DV-600AV-S Bedienungsanleitung

Initial Settings menu

Speakers settings

(DV-600AV only)
Setting
Audio Output
Mode
Speaker
Installation
Speaker Distance
Audio Output Mode
(DV-600AV only)
• Default setting: 2 Channel
Initial Settings
Digital Audio Out Audio Output Mode
Video Output Speaker Distance
Language Speaker Installation
Display
Options
Speakers
DV-600AV screen
If you connected this player to your amplifier
using the 5.1 channel analog outputs (front,
surround, center and subwoofer outs), set this
to 5.1 Channel ; if you connected only the
stereo outs, set to 2 Channel
Note
• Even if you set Audio Output Mode
Channel , you'll only get sound from all
speakers when playing a 5.1 channel
multi-channel disc.
• When set to 5.1 Channel
left/right channels are output from the
AUDIO OUT (2ch)
Channel if you want to listen to downmixed
stereo audio (for example, because you are
listening through the TV's built-in
speakers).
• When set to 5.1 Channel
output when playing DVD-Audio.
Option
2 Channel
5.1 Channel
–
–
2 Channel
5.1 Channel
.
to 5.1
, only the front
jacks. Change to
2
there is no digital
What it means
The player outputs analog audio in stereo only. See also
Audio Output Mode below.
The player outputs 5.1 channel analog audio. See also Audio
Output Mode below.
Specify the number and size of speakers in your system. See
also Speaker Installation on page 50.
Specify the distance of your speakers from your listening
position. Speaker Distance on page 49.
• If you set to 2 Channel
and MPEG audio is mixed down to two
channels so you still hear all the audio
recorded on the disc. With DTS encoded
audio, you can choose how the signal is
downmixed to PCM audio. See DTS
Downmix on page 43 to change the
downmix setting.
• Some DVD-Audio discs don't allow down-
mixing of audio. These discs always output
multi-channel audio regardless of the
setting made here.
, Dolby Digital, DTS
08
45
En