Connecting To An Av Receiver - Pioneer DV-600AV-S Bedienungsanleitung

02
Connections

Connecting to an AV receiver

You can connect this player to your AV receiver
using the multichannel analog outputs or one
of the digital outputs.
In addition to these connections, you should
also connect the 2 channel analog outputs for
compatibility with all discs.
You'll probably also want to connect a video
output to your AV receiver. You can use any of
the video outputs available on this player (the
illustration shows a standard (composite)
connection).
1 Connect the analog AUDIO OUT
(5.1ch)/AUDIO OUT L/R and VIDEO OUT
jacks on this player to a set of analog audio
and video inputs on your AV receiver.
AV receiver
VIDEO OUT
P
B
P Y
R
HDMI OUT COMPONENT VIDEO OUT S-VIDEO OUT
DV-600AV
2 Connect the AV receiver's video output
to a video input on your TV.
You can also use the SCART AV connector, the
S-video (DV-600AV only) or component video
jacks to connect to the AV receiver if you
prefer.
Tip
• You usually have to connect the same kind
of video cable between your DVD player
and AV receiver, and between your AV
receiver and TV.
14
En
To audio/video
inputs
C L
SL
SR SW R
AUDIO OUT (5.1ch)
Connecting the multichannel analog
outputs
(DV-600AV only)
If your AV receiver has 5.1 channel analog
inputs, we recommend connecting this player
to it using the multichannel analog outputs.
Doing this will ensure that you can enjoy all
kinds of disc, including Dolby Digital and DTS
DVD-Video discs, as well as high sampling rate
and multichannel DVD-Audio and SACD
discs.
• Connect the multi-channel audio
outputs on this player to the multi-channel
audio inputs on your AV receiver.
It's convenient to use three stereo audio
cables; one for the FRONT, one for the
SURROUND and one for the CENTER and
SUBWOOFER channels.
AV receiver
VIDEO OUT
P
B
P Y
R
HDMI OUT COMPONENT VIDEO OUT S-VIDEO OUT AUDIO OUT (5.1ch)
DV-600AV
You can also use the SCART AV connector, the
S-video (DV-600AV only) or component video
jacks to connect to the AV receiver if you
prefer.
Tip
• After connecting up and switching on, you
should change the Audio Output Mode
setting in the Initial Setup menu from the
default 2 Channel to 5.1 Channel. See
also Audio Output Mode on page 45.
To multi-channel
audio inputs
C L
SL
SR SW R