Video Output Settings - Pioneer DV-600AV-S Bedienungsanleitung

08
Initial Settings menu

Video Output settings

Setting
TV Screen
(This setting effective
for analog and HDMI
video output. See
also Screen sizes and
disc formats on
page 52.)
Component Out
AV Connector Out
HDMI Resolution
HDMI Color
40
En
Option
4:3 (Letter Box)
4:3 (Pan & Scan)
16:9 (Wide)
16:9 (Compressed)
Interlace
Progressive
Video
RGB
1920x1080p
1920x1080i
1280x720p
720x480p (NTSC) /
720x576p (PAL)
720x480i (NTSC) /
720x576i (PAL)
Full range RGB
RGB
Component
What it means
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the
screen.
Set if you have a widescreen TV.
Can be selected when you are connected via HDMI, and have
HDMI Resolution
the set to
1080i 1280 x 720p
or . Video in 4:3 can be properly
displayed on a 16:9 high definition television (with black bars
shown on either side of the screen).
Set if your TV is not compatible with progressive scan video.
Set if your TV is compatible with progressive scan video (see
your TV's instruction manual for details). The
indicator lights in the front panel display. See also Switching
the video output to interlace using the front panel controls on
page 13.
Note that progressive scan video is only output from the
component video jacks.
Ordinary (composite) video output, compatible with all TVs.
If your TV is compatible, this setting gives the best picture
quality.
Note that there is no output from the component jacks
when this setting selected.
Set if your TV supports 1920 x 1080 pixel progressive-scan
video.
Set if your TV supports 1920 x 1080 pixel interlace video.
Set if your TV supports 1280 x 720 pixel progressive-scan
video.
Set if your TV supports 720 x 480 pixel (NTSC) / 720 x 576 pixel
(PAL) progressive-scan video.
Set if your TV supports 720 x 480 pixel (NTSC) / 720 x 576 pixel
(PAL) interlace video.
If colors are weak, this gives brighter colors and deeper
black.
Use this setting if colors appear overly rich on the Full Range
RGB setting.
Outputs component video format (default setting for HDMI-
compatible devices).
1920 x 1080p 1920 x
,
PRGSVE