Speaker Distance - Pioneer DV-600AV-S Bedienungsanleitung

Initial Settings menu

Speaker Distance

(DV-600AV only)
• Default settings: all speakers
You only need to make this setting if you
connected this player to your amplifier using
the 5.1 channel analog outputs.
These settings do not affect any digital audio
output.
To get the best surround sound from your
system, you should set up the speaker
distances from your listening position.
Initial Settings
Digital Audio Out Audio Output Mode
Video Output Speaker Distance
Language Speaker Installation
Display
Options
Speakers
DV-600AV screen
1 Use the (cursor up/down) to select
a speaker.
• The and speakers are paired; you can't
L R
set them differently.
Initial Settings
Digital Audio Out
Video Output
L 3.0m
Language
C 3.0m
Display
R 3.0m
Options
SR 3.0m
Speakers
SL 3.0m
DV-600AV screen
2 Press (cursor right) to change the
speaker distance for the highlighted
speaker.
3 Use the (cursor up/down) to
change the distance.
• When you change the distance settings of
the front left ( L ) or front right (
all the other speaker distances change
relative to it.
• Front left/right ( /
L R
be set from 30 cm to 9 m in 30 cm incre-
ments.
3.0 m
5.1 Channel
R ) speakers,
) speaker distances can
• The center speaker (
m to 0.0 m relative to the front left/right
speakers.
• Surround left/right (
be set from –6.0 m to 0.0 m relative to the
front left/right speakers.
• You can't set the subwoofer (
4 Press (cursor left) to go back to the
speaker list if you want to modify another
speaker, or press ENTER to exit the Speaker
Distance screen.
Note
During playback of SACD and MPEG-audio
DVD-Video discs, the effective
speaker distance settings are –0.9 m to 0.0 m
relative to the front left/right speakers.
C ) can be set from –2.1
/ ) speakers can
SL SR
SW ) distance.
C , SL and SR
08
49
En