Secondary Reflector (Sub-Refl.); Modelling Light - Metz Mecablitz 64 AF-1 digital - Canon Bedienungsanleitung

11.3 Secondary reflector (SUB-REFL.)

The secondary reflector is used for frontal
brightening when using a bounce flash if the
main reflector is tilted sideways or upwards.
If the light from the secondary reflector is too
large, it can be reduced by half.
Setting procedure
• Press the
for the selection menu to appear.
OPTION • Press the
touch display.
O
OPTION
• Press the
RAPID
touch display and select
SUB-REFL.
ZOOM SIZE
• Press the
p
touch display.
q
SUB-REFL. O
• Press the
OFF
ton on the touch display and switch the
secondary reflector on or off. The setting is
1/1
adopted immediately.
1/2
Upon switching on the secondary reflector,
appears on the display
„ 1/1" or „ 1/2" is displayed in the INFO
menu.
1/1 means full light output, 1/2 means half
light output.
D
button as often as it takes
OPTION
sensor button on the
sensor buttons on the
SUB-REFL.
.
SUB-REFL.
sensor button on the
1/1 1/2 OFF
, or sensor but-

11.4 Modelling light

The modelling light is a high-frequency stro-
boscopic flash. It creates the impression of a
semi-permanent light for a duration of about
3 seconds. The modelling light enables the
user to assess light distribution and the for-
mation of shadows before taking pictures.
The modelling light is triggered with the
manual firing button
Setting procedure
OPTION
• Press the
for the selection menu to appear.
O
OPTION
• Press the
RAPID
touch display.
SUB-REFL.
p
q
• Press the
touch display and select
OPTION
• Press the
STANDBY
touch display.
MOD. LIGHT
BEEP
p
q
• Press the
MOD. LIGHT O
the touch display and switch the modelling
light on or off. The setting is adopted
OFF
immediately.
After activation of the modelling light, „
ON
" appears in the INFO menu.
.
D
button as often as it takes
OPTION
sensor button on the
sensor buttons on the
MOD. LIGHT
.
MOD. LIGHT
sensor button on the
ON OFF
or sensor button on
193
k